How to Repair a Leaky Faucet in 15 Minutes

Introduction ===============

A leaky faucet can be frustrating and wasteful, but repairing it doesn't have to be a daunting task. With the right tools and a little bit of know-how, you can fix a leaky faucet in just 15 minutes. In this article, we'll show you how to do just that.

Read more

Gather the Necessary Tools and Supplies -----------------------------------------

Before you start, make sure you have the following tools and supplies:

• Adjustable wrench or basin wrench
• Channel-type pliers (optional)
• Needle-nose pliers (optional)
• Teflon tape
• O-rings or gaskets (depending on the type of faucet)

Read more

Step 1: Turn Off the Water Supply -----------------------------------

The first step in repairing a leaky faucet is to turn off the water supply. You'll need to locate the shut-off valves for the hot and cold water lines under the sink. Turn both valves clockwise until they stop, which will shut off the water supply to the faucet. Open the faucet to drain the water from the pipes.

Read more

Step 2: Disassemble the Faucet ---------------------------------

You'll need to disassemble the faucet to locate the source of the leak. Start by removing any visible screws or clips that hold the handle or aerator in place. You may need to use a wrench or pliers to loosen any stubborn parts. Once you have access to the internal workings of the faucet, you should be able to see where the leak is coming from.

Read more

Step 3: Replace the O-Ring or Gasket --------------------------------------

Once you've identified the source of the leak, you'll need to replace the worn-out O-ring or gasket. You can purchase replacement O-rings or gaskets at a hardware store or home improvement center. Simply remove the old O-ring or gasket and replace it with the new one. Make sure it's properly seated and not twisted or misaligned.

Read more

Step 4: Reassemble the Faucet ---------------------------------

Now that the O-ring or gasket is replaced, you can reassemble the faucet. Start by putting back any parts you removed, such as the handle or aerator. Make sure they're securely fastened with screws or clips. Turn the water supply back on and check the faucet for leaks.

Read more

Conclusion ===========

Fixing a leaky faucet is a relatively simple task that can be completed in just 15 minutes. By following these steps, you should be able to identify and repair the source of the leak. Remember to turn off the water supply, disassemble the faucet, replace the O-ring or gasket, and reassemble the faucet. With these tips, you'll be able to fix your leaky faucet and save water and money in the process.

Read more